La Calce Del Brenta®
Venetian Plaster with Glossy Surface
Stucky - Venetian Plaster
Stucky is a mineral stucco composed of lime putty and selected marble dust.
Glossy, extremely fine.
Decorative interior finishing coat.
The substrate must be perfectly dry, dust-free, with no
humidity and salts stains. Seal the substrate with an oil based primer
or manufacturer recommended equivalent.
Application Procedure & Recommendations:
Base Coat: Brush or roll on a base coat of Preludio primer. This base coat will provide a surface with adequate
tooth and ensure even an suction of the finish coat.
Using an Pavan stainless steel 824/I Inox trowel, apply consecutive coats of Stucky wet on wet. Two to
three coats are recommended.
Ensure your Inox trowels blade is newly polished and free of any
imperfections. Polish the final coat of Stucky with a clean Inox blade before
the material is completely dry.
Between (0.6 - 0.8 kg/m^2) in three coats, depending
on substrate conditions and the final effect required.
Stucky can be pigmented with Stucky pigments for a wide range of colors.
See the Vivaldi catalog for colors and formulas.
Three steel can sizes.